ATMEGA328P-AU
Manufacturer: Atmel
The Atmel ATmega328P-AU is a microcontroller unit (MCU) from the AVR family, based on the RISC architecture. It has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM.
Product parameters:
8-bit AVR microcontroller
Operating voltage: 1.8V to 5.5V
Operating frequency: up to 20MHz
32KB of in-system programmable flash memory
2KB of SRAM
1KB of EEPROM
23 GPIO pins
6-channel 10-bit ADC
1 UART
1 SPI
1 I2C
Power-on reset and programmable brown-out detection
JTAG interface for on-chip debugging
This MCU is commonly used in a variety of applications such as consumer electronics, industrial automation, and Internet of Things (IoT) devices due to its low power consumption, small form factor, and high performance. The ATmega328P-AU is also popular for use in Arduino boards.
Stock:8000
Minimum Order:1
The Atmel ATmega328P-AU is a microcontroller unit (MCU) from the AVR family, based on the RISC architecture. It has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM.
Product parameters:
8-bit AVR microcontroller
Operating voltage: 1.8V to 5.5V
Operating frequency: up to 20MHz
32KB of in-system programmable flash memory
2KB of SRAM
1KB of EEPROM
23 GPIO pins
6-channel 10-bit ADC
1 UART
1 SPI
1 I2C
Power-on reset and programmable brown-out detection
JTAG interface for on-chip debugging
This MCU is commonly used in a variety of applications such as consumer electronics, industrial automation, and Internet of Things (IoT) devices due to its low power consumption, small form factor, and high performance. The ATmega328P-AU is also popular for use in Arduino boards.
